Greasing The Steering Housing - Cub Cadet 2000 Series Professional Shop Manual

2000 Series Tractors

Greasing the steering housing

The steering housing should be greased every 25
hours. To grease the steering housing:
1. Lift and safely support the front of the tractor.
2. Inject grease into the grease fitting at the steering
pinion gear until grease starts to ooze out.
See Figure 6A.27.
3. Lower the tractor to the ground.
4. Open the hood.
5. Inject grease into the grease fitting at the steering
housing pivot shaft until it starts to ooze out.
See Figure 6A.28.
NOTE: An 18" flexible extension hose for the
grease gun will make it easier to reach the
grease fitting.
80
Grease fitting
Figure 6A.27
Grease fitting
Figure 6A.28