Cub Cadet 2000 Series Professional Shop Manual page 22

2000 Series Tractors
8. Install the engine mounting nuts and bolts.
9. Remove the engine lift chain.
10. Install the dash by following the steps described in Chapter 4: Body.
11. Install the starter.
12. Reconnect the starter wires.
13. Reconnect the engine harness.
14. Reconnect the ground cable to the base of the engine.
15. Reconnect the fuel line to the fuel pump.
16. Install the muffler by following the procedures described in the muffler section of this chapter.
17. Install the hood.
18. Check the oil and fuel levels, top off as needed.
19. Test drive the tractor in a safe area before returning it to service.
16