Cub Cadet 2000 Series Professional Shop Manual page 98

2000 Series Tractors
NOTE: Lift the EPS out of the tractor.
NOTE: The EPS output shaft will pass through a
spacer, washer and the steering housing.
See Figure 6B.25.
NOTE: Install the EPS by following the previous
steps in reverse order.
NOTE: The washer that goes in between the pinion
gear and the steering housing, must be held
in place under the tractor while inserting the
EPS into the steering housing.
22. Test drive the tractor in a safe area before returning
it to service.
92
Spacer
Washer
Figure 6B.25