2000 Series Tractors
Reverse drive pedal shaft
To remove/replace the reverse pedal shaft:
1.
Remove the deck as described in Chapter 8 Cutting
Decks and Lift Shaft.
2.
Remove the screw that holds the reverse pedal to
the pedal shaft using a 9/16" wrench.
See Figure 5.25.
3.
Unhook the reverse pedal and remove it.
4.
Remove the E-ring and washer from the right side of
the forward pedal shaft.
5.
Disconnect the spring from the bolt in the reverse
pedal channel. See Figure 5.27.
50
Reverse pedal
Figure 5.25
E-ring
Figure 5.26
Spring
Figure 5.27