2000 Series Tractors
12.
Remove the cotter pin that secures the cruise con-
trol rod to the latch. See Figure 6B.20.
NOTE: There is a spring attached to the cruise rod
that will come off when the cotter pin is
removed.
13.
Remove the cruise control rod.
14.
Remove the screws, two on each side of the tractor,
that hold the dash support to the frame rails using a
1/2" wrench. See Figure 6B.21.
15.
Remove the four screws, indicated by the arrows in
Figure 6B.22, that hold the dash support to the
steering sub-frame using a 1/2" wrench.
90
Cruise control rod
Latch
Figure 6B.20
Figure 6B.21
Figure 6B.22
Spring
Screws