Input / Output Setting - Hitachi PC-ARFG-E Installation & Operation Manual

SERVICE & INSTALLATION MENU

6.1.4 Input / Output Setting

1 Select "Installation Menu" on the Service & Installation
screen and press "OK".
Service & Installation
Service Menu
Installation Menu
Check Menu
OK Enter
2 Select "Input/Output" setting and press "OK".
Installation Menu
Test Run
Function Selection
Thermistor Selection
Input/Output
Thermistor Calibration in Controller
Enter
OK
3 Select the indoor unit by pressing " ", " ", " ", or " " and
press "OK".
(This screen is NOT displayed when only one indoor unit
is connected with the controller. In this case, "Step4" is
displayed.)
Input/Output
00-00
00-01
00-02
OK Select
Indoor unit number
(Refrigerant system number—Address number)
58 PMML0565 rev.0 - 09/2021
(Mon) 16:30
Back
(Mon) 16:30
Back
ALL
Back
4 Press " " or " " to select the item.
5 Press " " or " " to change the setting.
Input/output :
Item
Input 1
Input 2
Output1
Output2
Output3
Confirm
OK
6 Press "OK" and the confirmation screen is displayed.
7 Select "Yes" and press "OK" to confirm the setting and the
screen returns to Step2.
If "Cancel" is selected, the setting is cancelled and the
screen returns to Step2.
If there is more than one indoor units connected to the
remote controller, the screen returns to Step3.
Press " " to return to Step4.
Update setting of
input/output?
Yes
OK Confirm
ALL
Setting Connector
03 CN3 1-2
08 CN3 2-3
08 CN7 1-2
08 CN7 1-2
06 CN8 1-2
Back
Cancel
Back