Check Interval Time Setting - Hitachi PC-ARFG-E Installation & Operation Manual

FUNCTION MENU
3 Press " " or " ", the operation changes as follows:
"ON" ↔ "Standby" ↔ "OFF" ↔ "Stop - Detect".
Select the operation and press "OK".
Press " " to return to the "Function Menu" screen.
If absent
ON
Standby
OFF
Stop - Detect
Select
OK

5.9.3 Check interval time setting

When the motion sensor detects an absence at selected check
interval time, the function "If absent" will be executed. The
interval can be selected from 30, 60, 90, 120 or 180 minutes.
(The default setting is 30 minutes.)
1 Select "Motion Sensor Setting" on the "Function Menu"
screen and press "OK".
Function Menu
Power Consumption Display
Autoboost
Comfort Setting
Motion Sensor Setting
Setback Setting
OK Enter
2 Press " " or " " to select "Check interval", and then press
"OK".
Motion Sensor Setting
Sensor
If absent
Check interval
OK Select
23 PMML0565 rev.0 - 09/2021
3 Press " " or " ", to select the interval check time and press
Back
(Mon on) 16:30
Back
: Cooling+Dry
: Standby
: 60min
Back
"OK".
Press " " to return to the "Function Menu" screen.
Check interval
30min
60min
90min
120min
180min
OK Select Back