6. Input/Output Setting
6. Input/Output Setting
1. Set Input/Output
Step1. Press "
display input/output setting screen.
•
If only one indoor unit is connected with the wired
remote controller, Step3 is displayed.
•
If multiple indoor units are connected with the wired
remote controller, step2 is displayed.
Step2. Indoor unit selecting screen is displayed.
•
Each indoor unit has its own index number. And the
corresponding refrigerant system number and address
number are displayed on the upper right corner of the
screen.
Press " "or " "to select the indoor unit by changing the
"Index No". Then press "
•
If all the indoor units are selected, the Index No. is
indicated as FF.
35
"and "
"simultaneously for 3 seconds to
" to confirm the selection.
Indoor Unit No. (refrigerant system)
Address No.
of the
selected unit
Index No.
Index No.