Toro Reelmaster 3100-D Operator's Manual page 92

Changing the Hydraulic Fluid (continued)
3. Install the hydraulic hose when hydraulic fluid stops draining.
4. Fill the tank with the specified hydraulic fluid.
Use only the hydraulic fluids specified. Other fluids could cause system damage.
5. Install the dipstick and cap onto the filler neck.
6. Start the engine and use all hydraulic controls to distribute the hydraulic fluid throughout
the system.
7. Check for leaks and then shut off the engine.
8. Check the fluid level and add enough to raise the level to full mark on the dipstick.
Do not overfill the reservoir.
Maintenance: Hydraulic System Maintenance
G417015
IMPORTANT
G417013
IMPORTANT
Page 6–32
Hydraulic filter
Filter head
Cap
Filler neck (hydraulic-fluid
reservoir)
Dipstick
3466-297 A