Servicing the Fuel/Water Separator (continued)
Replacing the Fuel/Water Separator Filter
1. Replace the filter as shown.
2. Start the engine, check for leaks, and shut off the engine.
Note:
Bleeding Air from the Injectors
Note:
Use this procedure only if the fuel system has been purged of air through normal
priming procedures and the engine does not start.
1. Prepare the machine for maintenance.
2. Unlatch and open the hood, and allow the engine to cool.
3. Loosen the tube nut for the fuel line to the No. 1 fuel-injector nozzle.
3466-297A
Repair all fuel leaks.
G452996
Page 6–19
Maintenance: Fuel System Maintenance