Table of Contents
Advertisement
Securing the Machine for
Transport
Important:
Do not operate or drive the machine
on roadways. Use care when loading or unloading
the machine into a trailer or truck.
1.
Park the machine on a level surface, engage
the parking brake (if applicable), and lower the
grinder.
2.
Shut off the engine and remove the key.
3.
Secure the machine to a trailer with chains or
straps using the tie-down/lift loops at the front
and rear of the machine
22). Refer to your local ordinances for trailer and
tie-down requirements.
Figure 21
1. Front tie-down loop
Figure 22
1. Rear tie-down loops
(Figure 21
and
Figure
g013180
g013181
Lifting the Machine
You can lift the machine using the tie-down/lift loops
as lift points
(Figure 21
18
and
Figure
22).
Advertisement
Table of Contents
