Cleaning; Removing Debris From The Machine - Toro 22600 SGR-6 Operator's Manual

Figure 23
1. Tooth
2. Tooth holder
3. Washer
4. Nut
5. Flat land

Cleaning

Removing Debris from the
Machine
Regular cleaning and washing will increase the life span of
the machine. Clean the machine directly after use, before the
dirt hardens.
Check before cleaning that the fuel tank cap is properly in
place to avoid getting water in the tank.
Use care when using a high-pressure sprayer because it can
damage warning decals, instruction signs, and the engine
Important: Lubricate the cutting wheel blade bearings
after cleaning.
19