Viewing error log
List of error codes
To view the Error Log do the steps below:
1. From the Start window, press Menu.
2. In the Menu, select 2. Diagnostics and press OK.
3. Select 2.3 Error Log and press OK.
4. The Error Log window displays Error code, Time, and Date.
5. Scroll forward/backward in the Error Log.
6. Press Back to return to window 2. Diagnostics.
7. Press Back to return to Start window.
The error codes and description of the codes are discussed in the following
list:
Note!
This is not a complete error code list!
This list only shows some of the most simple error codes in which the user
may be able to take actions on their own.
Error code
Description
0 0 0 2 0 0
DIP switch settings are changed
during run-time.
2.3 Error Log 1 (3)
134 0 0 0 0 0
14:02 3-feb-2009
Back
Trouble shooting
Recommended actions
1) Set settings back as it was
before, after a while the Sys-
tem Error pop-up window will
disappear and the IRF will be
energized again.
57