Configurations; Introduction; Dip Switches - ABB Arc Guard System TVOC-2 Installation And Maintenance Manual

Configurations

Introduction

DIP switches

Arc Monitor can be configured to trip selected breakers depending on which
optical detector or CSU is connected. This configuration is done with a DIP
switch.
Warning!
Make sure that supply voltage is switched off!
The DIP switches are located on the front left hand on the Arc Monitor. There
are 8 DIP switches. Only DIP switches 1, 2, 3, 4 and 6 are activated.
As default all DIP switches are set to position 0.
1 2 3 4 5 6 7 8
Installation
39