Getting Started; Introduction; Receiving And Checking; List Of Contents - ABB Arc Guard System TVOC-2 Installation And Maintenance Manual

Getting started

Introduction

Receiving and
checking

List of contents

Intermediate stor-
age
This chapter describes instructions how to receive and check the Arc Moni-
tor. Do the following steps:
1. Turn the package with the correct side up.
2. Remove the transport casing.
3. Visually inspect the Arc Monitor.
4. Check that all items are included, according to the delivery document.
Check the contents in this package as follow:
• Arc Monitor
• Connection cable 3 meter (118 inch) for external Human Machine Interface,
HMI
• Plastic nut for mounting external HMI
• Sealing for mounting external HMI
• Label for covering HMI contact on Arc Monitor, (only if external HMI is used)
• User manual on CD
• Quick installation guide
Note!
This package is a basic start kit. If you need more according for your system
needs then contact your local supplier.
Until the Arc Monitor is mounted it should be stored in its original package.
Installation
23