Lenovo 10KY Hardware Maintenance Manual page 92

3. Remove any parts that might prevent your access to the storage drive bracket. Depending on your
computer model, you might need to remove the optical drive or the storage drive in the optical drive bay.
See "Replacing the optical drive" on page 82 or "Replacing the storage drive" on page 85.
4. Locate the 3.5-inch storage drive. See "Computer components" on page 31.
5. Disconnect the signal cable and the power cable from the 3.5-inch storage drive.
6. Remove the screw that secures the storage drive bracket, and then remove the bracket from the chassis.
Figure 16. Removing the screw that secures the storage drive bracket
7. Remove the four screws that secure the 3.5-inch storage drive to the bracket. Then, slide the 3.5-inch
storage drive out of the bracket.
Figure 17. Removing the 3.5-inch storage drive
8. Take the new 3.5-inch storage drive out of the static-protective package.
9. Slide the 3.5-inch storage drive into the storage drive bracket so that the four holes in the storage drive
align with the corresponding holes in the bracket. Then, install the four screws to secure the 3.5-inch
storage drive to the bracket.
10. Position the storage drive bracket into the chassis so that the screw hole in the bracket aligns with the
corresponding hole in the chassis. Then, install the screw to secure the bracket to the chassis.
11. Connect the signal cable and the power cable to the 3.5-inch storage drive.
86
Lenovo S510 Hardware Maintenance Manual