Canon imagePRESS P400 Service Manual page 70

7. Switch off the Host Machine and confirm that the imagePRESS Server is cut off. (see
rebooting, and restarting" on page
8. Remove all external cables from the imagePRESS Server, except the power cable.
NOTE:
Be sure to leave the power cable connected between the imagePRESS Server and the power outlet.
9. Flip both of the imagePRESS Server service switches to the Service (ON) position.
No.
1 Flip the service switches from Normal (OFF) position...
2 ...to Service mode (ON) position.
10. Connect the Ethernet cable between the imagePRESS Server network port and an Ethernet port on the Windows
computer.
NOTE:
• Ethernet port: Connected to the imagePRESS Server upper part (for the user network)
• Ethernet cable: Use crossover cable
11. Switch on the Host Machine and confirm that the imagePRESS Server becomes ON.
Wait approximately 15 seconds for the imagePRESS Server to start up and show 00 on the LED display.
12. In the Select a Network Adapter window of the Fiery Installer Builder, select the network connection that
corresponds to the network port that you attached the Ethernet cable to, and then click Next.
11)
1
Figure 27: Flipping the imagePRESS Server service switches
4. INSTALLING SYSTEM SOFTWARE
2
Name
64
"Starting, shutting down,