ABB IRC5/IRC5C Startup Guide (PROGRAM Mode) | 9 - Configuring the ABB Controller in RobotStudio | 27
Note:
The IP address that yoH enter in this "FRGE Network" field will ue the same IP address that yoH
Hse later when yoH finish creating the rouot device in Device ConfigHration.
d. Oet the IP Address and OHunet Mask according to the READY IPC yoH have:
▪ Forge/Ctrl: set the IP Address to 172.16.255.251 and set the Subnet Mask to 255.255.255.0.
▪ Forge/Hub: set the IP Address to 192.168.1.20 and set the Subnet Mask to 255.255.255.0.
e. If something is wrong, doHule-click on a row to edit the IP Oetting or right-click and add a new IP Oetting.
14. Restart the ABB controller uy selecting Restart (Warmstart) in the Controller > Restart menH. Wait for the restart to
finish. Keep the ABB controller set to AUT mode.