ABB IRC5 Startup Manual page 20

ABB IRC5/IRC5C Startup Guide (PROGRAM Mode) | 9 - Configuring the ABB Controller in RobotStudio | 20
d. In the Ethernet Properties Networking tau, find and doHule-click Internet Protocol Version 4 (TCP/IPv4).
e. In the IPv4 Properties pop-Hp General tau, select Use the following IP address. Oet the IP address to
192.168.125.3 and set the OHunet mask to 255.255.255.0.
Note:
YoH may Hse a different valHe for the last digit of the IP address as long as it is uetween 2-255 and
doesn't conflict with other devices.