Advertisement
The Toro Company, 8111 Lyndale Ave. South, Bloomington, MN, USA declares that the following unit(s)
conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain
Toro models as indicated on the relevant Declarations of Conformity.
Model No.
Serial No.
02820
400000000 and Up
Relevant technical documentation has been compiled as required per Part B of Annex VII of 2006/42/EC.
We will undertake to transmit, in response to requests by national authorities, relevant information on this partly
completed machinery. The method of transmission shall be electronic transmittal.
This machinery shall not be put into service until incorporated into approved Toro models as indicated on the
associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in
conformity with all relevant Directives.
Certified:
Michael Benedict
Engineering Director
8111 Lyndale Ave. South
Bloomington, MN 55420, USA
November 1, 2022
Declaration of Incorporation
Product Description
Floating Cutting Unit Kit
(3-Plex Mower)
Invoice Description
FLOATING CUTTING UNIT
KIT 3-PLEX MOWER
Authorized Representative:
Marcel Dutrieux
Manager European Product Integrity
Toro Europe NV
Nijverheidsstraat 5
2260 Oevel
Belgium
General Description
Directive
Cutting unit kit
2006/42/EC
Advertisement
