Checking The Transmission (Hst) Oil - Yamaha YT624 Owner's Manual

PRE-OPERATION CHECK
CHECKING THE
TRANSMISSION (HST) OIL
Check the transmission oil quantity before
starting the engine and the transmission
(HST) is cold.
1. Check the oil reservoir under the control
panel.
1
1. Transmission (HST) oil reservoir
2. Oil reservoir cap
3. Maximum level mark "UPPER"
4. Minimum level mark "LOWER"
2. Check that the transmission (HST)
oil is in the middle level when the
ambient temperature is between the
–10 °C–0 °C.
When the ambient temperature is below
–20 °C, the oil might contract and oil
level become below "LOWER" level.
NOTICE
Do not check the transmission (HST) oil
level immediately after the engine has
stopped.
The oil might expand and cannot check
the correct level.
TIP
Position the Snowblower on a level surface,
when checking the oil level.
3. If the transmission (HST) oil level is
below the minimum level mark, refill the
2
3
4
– 26 –
recommended oil up to the specified
level (see page 46).
Recommended transmission (HST) oil:
Diesel engine oil
SAE 10W-30, Class CD or higher