Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Yamaha YS624T
Summary of Contents for Yamaha YS624T
-
Page 16: Periodic Maintenance
Check fuel hose It is recommended that these items be for crack or 5.* Fuel Line serviced by a Yamaha dealer or other damage.Replace qualified mechanic. if necessary. Checkforleakage. Retighten or 6.* Exhaust System replace gasket if... -
Page 17: Spark Plug Inspection
Spark Plug Torque: 10W-30. 1 0W-~ rnJ SAE 5W-30 20 Nm (2 m-kg, 14 ft-Ib) 5W~30 Engine oil quantity: ° G-540 YS624T /WM ENGINE OIL 02040 0c, -20 0.68 L (0.60 Imp qt, 8-541 0.72 US qt) Oil level checking YS828T /WM 1. -
Page 18: Auger Gear Oil
8-576 AUGER GEAR OIL 4. Reinstall the oil drain plug. Replacement Drain Plug: 31 Nm (3.1 m-kg, · Be sure the main switch key 22.4 ft-Ib) and spark plug lead are re- moved or disconnected NOTE: fore replacement. · Recommended gear oil classifica- Be sure the auger and im- tion;... -
Page 19: Foot Pedal
8-588 1. Placethe machine on a level sur- FOOT PEDAL (Auger Height) ADJUSTMENT face and loosen the skid nut. 2. Raise or lower the skid to adjust 4-Stage Position 1. Shift the shift lever to "Neutral" the auger clearance between the position. -
Page 20: Auger Shear Bolt Replacement
6-592 AUGER SHEAR BOLT 1. Place the machine on a level sur- REPLACEMENT face and loosen the scraper bolts and nuts. 2. Raise or lower the scraper to ad- · sure the main switch just the scraper height between and spark plug lead are re- the scraper edge and a level moved or disconnected surface. -
Page 21: Drive Track
6.594 6-596 DRIVE TRACK LUBRICATION Deflection Check NOTE: NOTE: Use the grease or oil (SAE 5W30) for Be sure the track is rotated several lubrication. turns and placed on a level surface before checking. 1. Lubricate the control rods as shown. -
Page 22: Fuel Filter
G-600 G-650 FUEL FILTER TROUBLESHOOTING WARNING: G-651 Never use or be near the fuel and Engine won't start solvent while smoking or in the 1. Fuel systems vicinity of an open flame. No fuel supplied to combustion chamber. o No fuel in tank Supply fuel G-601 o Clogged fuel line... -
Page 23: Drain The Fuel
G.700 STORAGE 2. Pull the recoil starter until you feel compression. Then stop Long term storage of your machine pulling. (This prevents will require some preventive proce- cylinder and valves from rust. dures to guard against deterioration. ing.) 704-001 B-716 G-701 CHASSIS DRAIN THE FUEL... -
Page 24: Specifications
8.800 WIRING DIAGRAM SPECIFICATION DIMENSIONS Unit YS624TM YS624WM YS828TM YS828WM Model Code Number <D Length mm (in) 1,390 (54.7) 1,420 (55.9) 1,430 (56.3) 1,460 (57.5) Overall Overall Width mm (in) 610 (24.0) 710 (28.0) 1,135 1,140 1,135 1,140 Overall Height mm (in) (44.7) (44.9)
Need help?
Do you have a question about the YS624T and is the answer not in the manual?
Questions and answers