SECTION TWO: Installing and wiring the 958
Wiring the 958
Avoiding cable wiring shortcuts
Most installation problems are caused by shortcuts taken with system cables. When wiring the 958,
follow the guidelines in Figure 4 and Figure 5 below.
Don't make sharp bends in the cables
Page 6
13.5"
11.6"
Figure 3: 958 yoke-mount dimensions (front)
DON'T DO THIS!
Don't run cables in
a way that allows water to flow down
Figure 4: Incorrect cable wiring
12.4"
958 Installation Manual, Rev. A1