Maintenance
Note:
Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 2 hours
After the first 10 hours
After the first 50 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 400 hours
Daily Maintenance Checklist
Duplicate this page for routine use.
Maintenance Check Item
Check the grass deflector
in the down position (if
applicable).
Check the condition of the
blades.
Lubricate all the grease
fittings.
1
Touch-up damaged paint.
1. Immediately after every washing, regardless of the interval listed.
Notation for Areas of Concern
Inspection performed by:
Item
Maintenance Procedure
• Tighten the castor wheel nuts.
• Check the PTO driveshaft-to-gearbox fastener torque.
• Tighten the castor wheel nuts.
• Change the gearbox lubricant.
• Lubricate the castor arm bushings.
• Clean the cutting unit.
• Lubricate the grease fittings. Lubricate the grease fittings immediately after every
washing.
• Check the gearbox lubricant.
• Tighten the castor wheel nuts.
• Check the blade drive belt adjustment.
• Clean under the cutting unit belt covers.
• Check the PTO driveshaft-to-gearbox fastener torque.
• Change the gearbox lubricant.
For the week of:
Mon.
Tues.
Wed.
Thurs.
Date
Information
17
Fri.
Sat.
Sun.