Table of Contents
Advertisement
3-11. Cam Assembly
Removal
1. Remove the cabinet. (Refer to Section 1-5.)
2. Remove the thermal head. (Refer to Section 3-9.)
3. Rotate the two bearings in the direction of the arrow A to remove them.
4. Remove the cam assembly in the direction of the arrow B.
5. Remove the cam (R), cam gear, cam (L), helical torsion spring (cam L) and three parallel pins from
the cam shaft.
A
Bearing
3-28 (E)
Cam gear
Cam (L)
Helical torsion spring (cam L)
Parallel
pins
B
Cam assembly
Cam shaft
Cam (R)
A
Bearing
UP-D898DC
Advertisement
Table of Contents
