Table of Contents
Advertisement
1-10. Speed Lock Function
The speed lock function lock/unlock the print speed to/from NORMAL. When the print speed is locked,
the printing is always performed in the NORMAL speed. Also, "SP: LOCK" is always displayed on the
SPEED menu selection screen, and the speed cannot be changed.
1. Turn the menu lever to the left, and set the [ON/STANDBY] switch to ON while pressing the [FEED]
button.
2. After checking that the beep sound is made after approx. 3 seconds, release the menu lever and [FEED]
button.
When locked, "S.LOCK" is displayed and when canceled, "S.UNLOCK" is displayed on LCD of this
unit.
1-11. Cleaning
1-11-1. Cleaning the Cabinet
n
When solvents such as benzene or thinner, or acid, alkaline or abrasive detergent, or chemical cleaning
cloths are used on the dirty cabinet, the surface finish may be damaged. Take care with respect to the
following:
. Clean the cabinet with a 50 to 70 v/v% concentration of isopropyl alcohol or a 76.9 to 81.4 v/v% con-
centration of ethanol.
. Stubborn stains may be removed with a soft cloth such as a cleaning cloth lightly dampened with mild
detergent solution and then clean using the above chemical solution.
. Do not use unnecessary force to rub the cabinet with a stained cloth. The cabinet may be scratched.
. Do not keep the cabinet in contact with a rubber or vinyl resin product for a long period of time.
The surface finish may deteriorate or the coating may come off.
1-11-2. Cleaning the Thermal Head
If the thermal head is contaminated, the streaks, white spots or scratches may appear on the print image.
Wipe the stains of the thermal head with a clean and soft cloth dampened with ethanol in concentrations
of 76.9 to 81.4 v/v%.
n
Do not use the gauze because it generates debris.
1-26 (E)
UP-D898DC
Advertisement
Table of Contents
