3-8-5. Setting and Check of Setting Value
1. Click the [SET] button of "Printer Settings" of the Setup tab and select the binary file (.KWI) saved
before replacement.
Beep sounds are made (3 beeps). Check that "REBOOT" is displayed on LCD of this unit.
2. Restart this unit.
3. Click the [OPEN] button of "Printer Information" of the Information tab.
The Printer Information screen is displayed.
4. Check that the value of "Set Serial No." is the same as the serial number of this unit.
UP-D898DC
Set Serial No.
3-15 (E)