Commissioning
5.4 Robot configurator
⑥
Specification of the storage location for the Compile Cycles AXCO folder.
This field is only activated if the selected robot type requires the Compile Cycle AXCO.
⑦
Specification of the storage location of the control project to be created and selection option to access the storage
location automatically after creating the control project.
⑧
Input field for any comments on the project.
⑨
Continue to next configuration step
Figure 5-9
Robot configurator - Configuring a project
40
SINUMERIK Run MyRobot /Direct Control
Commissioning Manual, 07/2020, A5E45238414B AD