Fan Replacement (Frames C And D, Acsm1-204Ax-Xxxx-X) - ABB ACSM1 Hardware Manual
Regen supply modules
Hide thumbs
Also See for ACSM1:
- Manual (510 pages) ,
- Firmware manual (448 pages) ,
- Hardware manual (112 pages)
Table of Contents
Advertisement
64
Fan replacement (Frames C and D, ACSM1-204Ax-xxxx-x)
To remove the fan, release the retaining clip (arrowed) carefully using a screwdriver.
Pull the fan holder out. Disconnect the fan cable. Carefully bend the clips on the fan
holder to free the fan.
Install new fan in reverse order.
Note: The airflow direction is bottom-to-top. Install the fan so that the airflow arrow
points up.
Maintenance
Advertisement
Table of Contents
