Delivery Check And Regen Supply Module Identification; Before Installation; Requirements For The Installation Site - ABB ACSM1 Hardware Manual

Delivery check and regen supply module identification

Check that there are no signs of damage. Before attempting installation and
operation, check the information on the type designation labels of the regen supply
module and the WFU-xx regen filter module to verify that the modules are of the
correct types. The label is located on the left-hand side of the regen supply module.
Regen supply module (ACSM1-204) type designation label
Type code + options (see page 26)
Frame size
The first digit of the serial number refers to the manufacturing plant. The 2nd and 3rd
digit indicate the year of manufacture, while the 4th and 5th digits indicate the week.
Digits 6 to 10 are a running integer starting every week at 00001.
Regen filter module (WFU-xx) type designation label

Before installation

Check the installation site according to the requirements below. Refer to
drawings

Requirements for the installation site

See
The ACSM1-204 is to be mounted in an upright position. The wall the module is to
be mounted on must be even, of non-flammable material and strong enough to carry
the weight of the module. The floor/material below the module must be non-
flammable. The ACSM1-204, WFU-xx filter and the ACSM1-04 drive(s) should be
mounted on the same conductive plate on the back wall of the cabinet to achieve full
EMC performance.
IP20 / UL Open type
Un 3~380...500V
In 18 A
fn 48...63 Hz
WFU-02 CODE:3AUA0000049815 SN: A9401234TR
3AUA0000049812AYWWssssTR
3AUA0000049815A9401234TR
for frame details.
Technical data for the allowed operation conditions of the regen supply module.
Ratings
WFU-02
LISTED 1PD8
RoHS
RoHS
IND. CONT. EQ.
Intended to be used with ABB drives
Made in Finland
Compliance markings
Serial number
Mechanical installation
33
Dimension