Inquiries - ABB ACSM1 Hardware Manual

18
Check the insulation of the supply cable, the DC
output cable, and the resistor cable (if present).
Connect the power cables.
Connect the control and the auxiliary control cables.
Check the installation.
Commission the regen supply module.
Commission the braking chopper if required.
Operating the regen supply module: start, stop, etc.

Inquiries

Address any inquiries about the product to the local ABB representative, quoting the
type code and the serial number of the unit. If the local ABB representative cannot
be contacted, address inquiries to the manufacturing facility.
About this manual
Task See
Electrical installation: Checking the insulation of
the assembly (page 47)
Electrical installation: Power and control cable
connection: (page 48) and
control cables: (page 54)
For optional equipment:
Resistor braking (page 83)
Manuals for any optional equipment
Installation checklist (page 59)
Appropriate Firmware Manual
Resistor braking (page 83)
Appropriate Firmware Manual
Connecting the