Mitsubishi Electric MELSEC iQ-R Series User Manual page 105

Creating the slave node information with auto configuration
Execute the auto configuration function to create the slave node information, and use it as the master function parameter.
( Page 33 Auto Configuration Function)
• Execute the auto configuration function by turning off and on 'Auto configuration request' (Y15).
• When the parameter is created by the auto configuration function, it is not saved to the flash ROM. Save the
parameter. ( Page 105 Saving the parameter of the master node)
Classification Label name
Module label RDN91_1.bSts_IO_Communicating
RDN91_1.bSts_Auto_Configuring
RDN91_1.bSts_Auto_Configuration_Completion
RDN91_1.bSet_IO_Communication_Request
RDN91_1.bSet_Auto_Configuration_Request
RDN91_1.bSet_Request_For_Saving_Parameters_To_Flash_ROM
RDN91_1.uBFM_Control_Direct.uAuto_Configuration_Operation_Setting_D
RDN91_1.uBFM_Control_Direct.uParameter_For_Master_Function_D[5]
RDN91_1.uBFM_Control_Direct.uParameter_For_Master_Function_D[6]
RDN91_1.uBFM_Control_Direct.uParameter_For_Master_Function_D[21]
RDN91_1.uBFM_Control_Direct.uParameter_For_Master_Function_D[33]
RDN91_1.uBFM_Control_Direct.uParameter_For_Master_Function_D[34]
RDN91_1.uBFM_Control_Direct.uParameter_For_Master_Function_D[35]
Label to be defined Define global labels as shown below.
Description
I/O communicating
Auto configuration executing
Auto configuration completion
I/O communication request
Auto configuration request
Parameter save request to Flash ROM
Auto configuration operation setting
Master function parameters
(connection type of 1st node)
Master function parameters (number of
byte modules of 1st node)
Master function parameters
(connection type of 3rd node)
Master function parameters (expected
packet rate of 4th node)
Master function parameters (watchdog
timeout action of 4th node)
Master function parameters (production
inhibit time of 4th node)
Appendix 5 Setting the Parameter with a Program
Device
X01
X14
X15
Y11
Y15
Y17
U0\G1008
U0\G473
U0\G474
U0\G489
U0\G501
U0\G502
U0\G503
A
APPX
103