Overview of each connection type
One of the following connection types, which are defined by the DeviceNet specification, can be selected for each slave node.
• Polling
• Bit strobe
• Change of state
• Cyclic
For the connection type available for the slave node, refer to the manual of each slave node.
Polling
The polling is the communication method that repeats the following communication from to to each slave node.
Ò
(2)
(1) Master node
(2) Slave node
The master node transmits the data.
The slave node transmits the data using as a trigger.
The master node transmits the data.
The slave node transmits the data using as a trigger.
The master node transmits the data.
The slave node transmits the data using as a trigger.
RJ71DN91
(1)
Ó
×
Ö
Õ
Ô
(2)
(2)
1.1 Master Function (I/O Communication)
1
1 FUNCTIONS
21