Updating Firmware From The Management Computer - NEC Express5800 Series User Manual

Chapter 4 Configuring Client Settings with Atrust Client Setup
2.5

Updating Firmware from the Management Computer

Update Firmware allows users to update client firmware from the remote management computer to get the client
device up-to-date.
To update client firmware from the remote management computer, do the following:
1. On Atrust Client Setup, click System > Firmware Update.
2. Under the Firmware Update section, click the Firmware Type drop-down menu to select Firmware. The system will
then automatically download the Firmware list from the remote computer.
3. On completion, a window appears notifying you that the Firmware list has been loaded. Click OK to continue.
88
Note Ensure that your client has been added into a managed group under Atrust Device Manager
installed on a remote computer, and that you have imported client firmware files into Atrust Device
Manager. These are prerequisites of this feature.
Note You can also update the firmware of a client with a snapshot (the system image of a client) which is
coming from another client of the same model and is with a newer firmware version. For detailed
information, see Chanter 4, "2.6 Taking Snapshots for Mass Deployment" about the snapshot.
Note The available firmware versions depend on how many versions have been imported into the remote
Atrust Device Manager.
Express5800/US320f User's Guide
2. Configuring System Settings