Enabling / Disabling Automatic Registration And Stealth Mode - NEC Express5800 Series User Manual

Chapter 4 Configuring Client Settings with Atrust Client Setup
2.10

Enabling / Disabling Automatic Registration and Stealth Mode

By activating the automatic registration function, US320f can automatically register initial registration to Atrust Device
Manager. Also, by enabling the stealth mode, it is possible to prevent US320f from being detected by IP range from Atrust
Device Manager.
The procedure for specifying automatic registration is as follows.
1. Click System > Advanced on the Atrust Client Setup screen.
2. Select the Enable Auto Registration checkbox.
3. Click Save to confirm the selection.
Important  To use the automatic registration function, the setting on the Atrust Device Manager server
side must be valid.
 It is recommended to enable stealth mode, if you do not manage terminal with Atrust Device
Manager.
Express5800/US320f User's Guide
2. Configuring System Settings
111