Relocation And Storage - NEC Express5800 Series User Manual

Chapter 9 Operation and Maintenance
3.

Relocation and Storage

For how to relocate or store US320f, contact your service representative.
1. Turn off US320f. (The Power status LED goes off.)
2. Pull out the power cord connected to US320f from the inlet.
3. Remove all cables connected to US320f.
4. Pack US320f securely so as to avoid damage, shock and vibration.
234
Observe the following instructions to use US320f safely. Failure to follow these instructions
may result in loss of life or serious personal injury. For details, see Precautions for Use.
 Do not disassemble, repair, or alter US320f.
 Do not remove the lithium battery.
 Do not handle US320f with the power cord of US320f connected to a power source.
Observe the following instructions to use US320f safely. Failure to follow these instructions
may cause a fire, personal injury, or property damage.
 Do not drop US320f.
Important  When carrying out major work such as changing the floor layout, contact your sales or service
representative.
 To enable US320f and built-in devices to operate properly following relocation or storage, it is
recommended to keep US320f in a place where standard room temperature can be
maintained.
 Observe the storage conditions (temperature: 10C to 55C, humidity: 10% to 95% and no
condensation) when storing US320f.
Important Before operating US320f again after transportation or storage, first check and adjust the system
clock. If the system clock gains or loses a significant amount of time as time passes even if you
adjust the time, contact your service representative and request maintenance. When US320f and
built-in optional devices are moved from a cold site to a warm site, condensation may occur and
using them without any adjustment may cause a malfunction or fault to occur. Before the devices
are operated again after transportation or storage, they should be suitably prepared for the usage
environment.
Express5800/US320f User's Guide
3. Relocation and Storage