Wireless Lan Settings; Maintaining Wireless Lan Profile - NEC Express5800 Series User Manual

Chapter 5 Administrative Utilities and Settings
13.

Wireless LAN Settings

To communicate with the wireless LAN access point with US320f, it is necessary to connect the optional USB wireless LAN
adapter to the main body USB port.
The Windows 10 IoT client can connect to the wireless LAN using the following security and encryption.

No authentication (open system) Encryption WEP

Shared key encryption WEP

WPA Personal (WPA - PSK) Encrypted AES and TKIP

WPA 2 Personal (WPA 2 - PSK) Encrypted AES and TKIP

WPA Enterprise (WPA-Enterprise) Encrypted AES and TKIP

WPA2 Enterprise (WPA2-Enterprise) Encrypted AES and TKIP

IEEE 802.1X encrypted WEP
The following network authentication methods can be used.

EAP-PEAP(EAP-MS-CHAP v2, TLS)

EAP-TLS

EAP-TTLS

EAP authentication method other than Microsoft
Also, in US320f, changes made when UWF (Unified Write Filter) is enabled are lost after restart. Therefore, in order to
retain the wireless LAN profile, it is necessary to set the wireless LAN with UWF disabled (refer to Chapter 4 "2.9
Configuring UWF (Unified Write Filter)") However, since it is necessary to sign in with the Administrator account in order
to invalidate UWF, it may be impossible for the user to set up the wireless LAN profile in the operational environment. In
that case, you can register the wireless LAN profile in the UWF write protect exception to keep the wireless LAN profile
implemented with the User account.
13.1

Maintaining Wireless LAN Profile

To register the wireless LAN profile in the UWF write protection exception, follow the procedure below.
1. Start US320f.
2. After signing in automatically with User account, sign out.
3. Enter the user ID and password for the Administrator account and sign in.
4. Click Run from the right-click menu of the start button.
5. Specify the file name and enter cmd in the run dialog to start the administrator command prompt.
6. Execute the following UWF command at the command prompt.
(1) uwfmgr file add-exclusion "C:\ProgramData\Microsoft\wlansvc\Profiles\Interfaces"
(2) uwfmgr registry add-exclusion HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\wlansvc
(3) uwfmgr registry add-exclusion HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Wlansvc
(4) uwfmgr registry add-exclusion HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WwanSvc
7. Exit the command prompt and restart US320f.
Use of EAP-MD5 is not supported.
Note
Express5800/US320f User's Guide
13. Wireless LAN Settings
183