Configuring Advanced Rdp Connection Settings; Settings For The Connection Type Of Remote Desktop - NEC Express5800 Series User Manual

Chapter 4 Configuring Client Settings with Atrust Client Setup
5.5

Configuring Advanced RDP Connection Settings

The table below provides a description of each setting item for RDP connections. See this table to configure advanced
settings and customize your US320f desktop shortcuts or Start screen tiles for service access.

5.5.1 Settings for the Connection Type of Remote Desktop

 General Sub-tab
Server Settings
Item
Session Name
Server Address
Connection Type
Connection Quality
Server Authentication
Login Settings
Item
Username
Password
Domain
Note Note that available settings vary with the selected connection type.
 For descriptions of settings for the connection type of Remote Web Access, see Chapter 4,
Note
"5.5.2 Settings for the Connection Type of Remote Web Access".
 For descriptions of settings for the connection type of Web Feed, see Chapter 4, "5.5.3 Settings
for the Connection Type of Web Feed".
Type in the name for Remote Desktop sessions.
Type in the computer name or IP address of the server/virtual machine where to deliver a Remote Desktop
session.
This table only provides descriptions for available settings when Remote Desktop is selected.
Three connection types are available:
Option
Remote Desktop Provides access to remote desktops/applications.
Remote Web Provides access to remote desktops/applications through a Web browser
Access (Internet Explorer).
Web Feed Provides access to remote applications through published Start screen tiles.
Select the setting that best describes the quality of your network connection.
Four options are available: Very Fast (LAN), Fast (Broadband), Slow (Modem), and Automatic Detection
Select what to do next if the client cannot verify the identity of the remote computer. Three options are
available: Connect and don't warn me, Warn me, and Do not connect.
Option
Connect and don't warn me
Warn me
Do not connect
Type in the user/account name used for authentication.
Type in the password of the user account used for authentication.
Type in the domain of the server.
NOTE: Leave this field blank if the server doesn't belong to any domain.
Express5800/US320f User's Guide
5. Configuring Service Access Settings
Description
Description
Description
Connects anyway without any warning.
Warns and allows users to choose whether to connect or not.
Disallows the connection.
Description
127