Disabling Or Enabling Attached Audio Devices - NEC Express5800 Series User Manual

Chapter 4 Configuring Client Settings with Atrust Client Setup
3.4

Disabling or Enabling Attached Audio Devices

To disable/enable attached audio devices, do the following:
1. On Atrust Client Setup, click Devices > Audio.
2. Click to check/uncheck Enable System Audio Device.
3. Click Save to confirm your selection.
 If you disable locally attached audio devices, client users are not allowed to perform audio
Note
playback or recording with these devices in an RDP / ICA / View session.
 To perform audio playback or recording with local audio devices in an RDP / ICA / View session,
you need to enable locally attached audio devices here (the Audio setting item under Devices
tab) and configure audio related settings (if any) in the RDP / ICA / View connection settings.
For detailed instructions, see sections:
– Chapter 4, "5.5 Configuring Advanced RDP Connection Settings"
– Chapter 4, "5.8 Configuring Advanced ICA Connection Settings"
– Chapter 4, "5.11 Configuring Advanced View Connection Settings"
Note The change will take effect after the client has been restarted.
Express5800/US320f User's Guide
3. Configuring External Device Settings
115