Chapter 4 Configuring Client Settings with Atrust Client Setup
2.7.2 Deploying a Snapshot System Image from a USB Flash Memory
To deploy a system image to US320f by using a snapshot in the USB flash memory, do the following:
1. Insert the USB flash memory into an empty USB port on the client.
2. Start or restart the client.
3. Press the <F7> key on the keyboard during POST (Power-On Self-Test) to open the Boot Device menu.
4. Select to boot from the connected <USB flash memory>.
5. Select Yes and click Next.
102
Express5800/US320f User's Guide
2. Configuring System Settings