Accessing Microsoft Remote Desktop Services By Using Remote Desktop Connection (Span Mode) - NEC Express5800 Series User Manual

Chapter 3 Using US320f
3.2
Accessing Microsoft Remote Desktop Services by Using Remote Desktop
Connection (Span Mode)
To access Remote Desktop Services by using Remote Desktop Connection (span mode), do the following:
1. Double click the Span Remote Desktop Connection icon on the desktop.
2. Enter the name or IP address of the remote computer in Computer on the Remote Desktop Connection window,
and then, click Connect.
3. Enter your credentials, and then click OK.
68
Note To establish a connection in the span mode, connect the primary and secondary monitors to US320f.
In addition, open Control Panel and click Display -> Change display settings -> Display to properly
configure your display settings. (For details, see documentation available from Microsoft at
http://www. microsoft.com.)
Note If you select Show Options -> Display tab -> Display configuration and select the Use all my
monitors for the remote session check box, you will be connected to the virtual PC in multiple
monitors mode (that is, the primary and secondary monitors will be connected to the virtual PC
independently).
Express5800/US320f User's Guide
3. Accessing Microsoft Remote Desktop Services