Canon 1064C001 Operation Manual page 95

94
Event • External Device (P. 161)
• Audio Detection (P. 164)
• Timer (P. 167)
• Intelligent Function (P. 169)
• Switch Day/Night (P. 199)
• Linked Event (P. 200)
Security • User Management (P. 100)
• Host Restrictions (P. 204)
• SSL/TLS (P. 206)
• 802.1X (P. 209)
• IPsec (P. 211)
Memory Card (P. 215) Settings for recording video to a memory card when an event
is triggered.
The settings of this item are the same as those in [Video
Record] > [Memory Card]. Settings configured on one page
are also reflected on the other.
Maintenance • General (P. 218)
• Backup / Restore (P. 220)
• Update Firmware (P. 221)
• Log (P. 222)
User Page
Link to web page customized by the user.
For information on the User Page, contact a Canon Customer Service Center.
R13 M50 H652 H651
Operation settings for external device output and for
external device input triggered events.
R13 M50 H652 H651
Detected changes in audio input from the microphone
connected to the camera can trigger operations such as
video recording or e-mail notification.
The timer function can generate events that can trigger
operations, such as video recording and e-mail
notifications, at regular intervals.
Configure the intelligent functions such as moving object
detection, camera tampering detection, and intrusion
detection.
The camera angle can be moved to preset positions when
Day Mode and Night Mode are switched.
R13 M50 H652 H651
By linking two types of events, a single event is triggered.
The settings of this item are the same as those of the [User
Management] in [Basic] menu. Settings configured on one
page are also reflected on the other.
Separate access control from IPv4 and IPv6 addresses
can be set.
Certificate creation and management, and encrypted
communication settings.
Settings for 802.1X authentication and authentication
status display, and for certificate administration.
Settings for using IPsec.
Check the device information/settings, and licenses, and
reboot and initialize the device, etc.
Perform backup and restoration.
Perform firmware updates.
Display logs and configure log notification.