Camera Settings - Canon 1064C001 Operation Manual

M50 H652 H651
Note
The Digital PTZ trim frame (yellow) displayed during startup can be set to incremental sizes. The sizes that can be set are the same as the
Digital PTZ of the Viewer (P. 77).

Camera Settings

Sets the camera settings at camera start up.
[Simple Camera Settings]
Recommended settings for [Camera Settings] are displayed according to the selected type. You can also change the
recommended settings as required and click [Apply].
Type Motion Priority
Reduces
Usage scenario vibrations for
moving subjects.
Auto (Shutter-
[Exposure]
priority AE)
[AGC Limit] 6
[Shutter Speed] 1/1000 (sec.)
[Slow Shutter] -
[Smart Shade
Disable
Control]
[Noise Reduction] Mild
[Sharpness] 3
[Color Saturation] 4
[Haze
Disable
Compensation]
Important
Note the following regarding [Simple Camera Settings].
– [Motion Priority]: The range in which the appropriate exposure can be maintained becomes narrower.
Flickering may occur due to fluorescent lighting, etc.
– [Depth Priority]: The range in which the appropriate exposure can be maintained may become narrower.
– [Low Light Visibility]: Residual images may appear for moving subjects in dark situations.
– [Data Size Reduction]: Residual images may appear for moving subjects in dark situations.
[Focus]
Selects the focus.
[Auto]
Automatically adjusts the focus.
[Manual]
You can click and hold the [Near] and [Far] buttons in [Adjust Focus] to adjust the focus in the near and far directions.
When you click [Exec] in [One-shot AF], the camera will focus once using autofocus and then switch to manual mode.
The following procedure enables you to adjust the focus appropriately.
1. Select [Auto (Aperture-priority AE)] in [Exposure], and move the aperture slider to the right limit to fully open the
aperture. The depth of field becomes shallow, and you can adjust the focus appropriately.
2. To adjust the focus, click and hold the [Far] or [Near] button in [Adjust Focus], or click [Exec] in [One-shot AF].
3. When you have finished adjusting the focus, change [Exposure] to an appropriate setting.
H651
Note
When using [Adjust Focus], it is recommended that you use [Adjust Focus] in [Camera Angle] > [Camera Settings] (P. 49).
Depth Priority Low Light Visibility
Brightens by
Focuses within a
raising the
wide range, from
sensitivity for dark
near to far.
subjects.
Auto (Aperture-
Auto
priority AE)
6 6
- -
Disable 1/8 (sec.)
Disable Disable
Standard Strong
6 3
4 4
Disable Disable
Data Size
Standard Setting
Reduction
Cancels the
Reduces the data scenario settings
size in low-light and restores the
conditions. factory default
settings.
Auto Auto
4 6
- -
1/8 (sec.) Disable
Disable Disable
Strong Standard
3 3
2 4
Disable Disable
5
113