Warning Log - Canon 1064C001 Operation Manual

Warning log


System warning
S220 PAN/TILT operation warning [warning]
Description %1 warning detected. [%2] (S220)
%1 PAN | TILT
%2 Warning details
Meaning An error occurred during operation or
stopping of PAN/TILT.
Countermeasure Check that the camera is not touching
the dome, etc.
S230 Decrease of fan rotation speed
[warning]
Description fan [%1] speed is too slow. (S230)
%1 Fan number
Meaning Detected decrease in fan rotation
speed.
If this happens frequently, arrange for
servicing.
S231 Heater unit not operating [warning]
Description A 24 V AC power source is not
supplied to the heater unit. (S231)
Meaning A heater unit is attached but not
supplied with a 24 V AC power source.
Countermeasure The 24 V AC power source required to
operate the heater unit is not being
supplied. Check the type of power
source and the power connection.

HTTP server warning
H143 User name specification error [notice]
Description (http_auth.c.XXX) get_password failed,
IP:%1 (H143)
%1 IP address
Meaning An unknown user was specified in user
authentication. This log message may
also be displayed during normal
operations when using a web browser
other than Internet Explorer/Microsoft
Edge.
H144 Password specification error [notice]
Description (http_auth.c.XXX) password doesn't
match for %1 username%2, IP:%3
(H144)
%1 URL XSS vulnerability countermeasure
implementation (process equivalent to
ftpd)
%2 User Name
%3 IP address
Meaning A wrong password was specified in
user authentication.
H201 Timeout disconnect [warning]
Description a request for %1 timed out after writing
%d seconds (H201)
%1 Request URI
%d 360 (Timeout time)
Meaning Disconnected due to HTTP server
timeout (360 sec.).

wvhttp warning
W101 Invalid user name [notice]
Description user <User name> not found (W101)
Meaning The camera was accessed by an
unauthorized user.
W102 Invalid password [notice]
Description user <User name> password
mismatch (W102)
Meaning The password is invalid.
W130 Buffer recovered [notice]
Description stream buffer recovered (W130)
Meaning Image buffer for stream recording has
recovered.
W201 Invalid panorama image [warning]
Description corrupt panorama image - ignored
(W201)
Meaning Panorama image information
acquisition failed.
6
235