Canon 1064C001 Operation Manual page 67

Set a capture mode suited to the brightness of the camera installation environment (P. 73).
(J) Clear IR Mode
Selects whether to enable/disable the clear IR mode that reduces shade and heat shimmer in far
backgrounds (P. 73).
(K) Switch Area Zoom/Drag to Move
Switch between Area Zoom and Drag to Move functions for dragging in the video display area (P. 69).
(L) Pan/Tilt/Zoom
If you enable this button (make it purple), the pan/tilt/zoom sliders are displayed on the screen to perform
operations (P. 70).
The pan slider is displayed on the bottom of the screen, the tilt slider on the left edge of the screen, and the
zoom slider on the right edge of the screen.*
(M) BLC (Back Light Compensation)
Turns on/off backlight compensation (P. 73).
(N) Home Position
Move the camera angle to the home position (P. 74).
(O) Obtain/Release Camera Control Privileges
Obtain and release the camera control privileges (P. 67).
(6) Event and Input/Output Menu
Use external device output (P. 84).
(7) Snapshot
Displays the still image displayed when the button was clicked by opening the snapshot panel (P. 79).
(8) Memory Card Recording
Start and stop video recording to a memory card (P. 80).
(9) Information Display
Information, warning and error messages are displayed (P. 62).
66
M50
R13 R12 M50
R13 M50 H652 H651