Canon 1064C001 Operation Manual page 72

(1) [Pan/Tilt]
The camera angle will move in the direction of each arrow. Movement will continue while you hold the button
down, and stop when you release it.
Click the center button to move the camera angle to the midpoint of the pan/tilt range of motion. However, if a
view restriction is set (P. 128) and the midpoint is outside the restrict view area, the camera angle moves to the
edge of the restrict view area.
(2) Pan/Tilt Speed
Set the operation speed by the [Pan/Tilt] button.
(3) [Zoom]
Click the buttons to zoom in and out. Movement will continue while you hold the button down, and stop when you
release it.
(4) Zoom Speed
Set the operation speed by the [Zoom] button.
Note
Even if you change the pan/tilt speed or zoom speed setting, the speed of pan/tilt/zoom operations on the slider or panorama does
not change.

Operating the Camera with the Panorama Display Panel
You can operate the camera using the frames within the panorama display area.
To display a panorama image in the panorama display panel, you must create the image and save it to the camera
(P. 123).
Click the [Panorama Display] button.
1
The [Panorama Display] panel is shown in the control display area.
Use the frame in the panorama display panel to pan/tilt/zoom the camera.
2
The frame indicates the area being captured by the current camera.
(1)
(2)
(3)
(4)
4
71