Steps For Setting Up The Camera; Step 1 Preparing To Install The Camera; Step 2 Checking The Camera Connection; Step 3 Installing The Camera - Canon 1064C001 Operation Manual

Steps for Setting Up the Camera

Step 1 Preparing to Install the camera

Make preparations to use the camera via a network.
Install the necessary software
 "Installing Software" (P. 30)
Check/configure the computer and web browser security settings
 "Checking/Configuring Security Settings" (P. 33)
Use the Camera Management Tool to configure initial camera settings.
 "Configuring Initial Camera Settings" (P. 38)

Step 2 Checking the Camera Connection

Access the camera with a computer to ensure preparations have been properly
completed.
Accessing the Camera to Check Videos
 Accessing the camera from the Camera Management Tool (P. 41)
 Entering an IP Address from a web browser to access the camera (P. 52)

Step 3 Installing the Camera

Install the camera to suit the environment it will be used in.
 "Installation Guide"

Step 4 Setting the Camera Angle

Use [Camera] > [Camera Angle] on the Setting Page to set the camera angle
while checking video on the computer screen.
 "Setting the Camera Angle" (P. 45)
26
Camera Management Tool
Camera Viewer
Camera Angle Setting
H651