Table of Contents
Advertisement
[Memory Card]
Memory Card Operations and Information Display
Settings for recording video to a memory card inserted in the camera. You can also see the status of the memory card.
[Memory Card] is the same as [Video Record] > [Memory Card]. Settings configured on one [Memory Card] page are also
reflected on the other.
Important
Information recorded to the memory card may be regarded as "personal information". Take sufficient precautions for handling this
information when releasing the camera to third parties for disposal, transfer or repair.
Note
• Memory card videos can be viewed and managed using the Recorded Video Utility. For information on operating the Recorded Video
Utility and its downloaded data, please refer to "Recorded Video Utility User Manual".
• When a large number of files have been recorded onto a memory card, the Recorded Video Utility can take a considerable amount of
time to process the video list (the greater the number of files, the longer it will take). Please reduce the number of days saved in [Auto
Video Delete], or manually delete unneeded files with the Recorded Video Utility, on a regular basis.
The number of files saved on the memory card can greatly be reduced, by using H.264 as the video format, instead of JPEG.
• The following memory cards can be used.
– SD memory card, SDHC memory card, SDXC memory card
– microSD memory card, microSDHC memory card, microSDXC memory card
• For inserting and removing the memory card, please refer to "Installation Guide".
Video Record Setting
Sets whether to record video from the camera to a memory card or upload it with HTTP or FTP.
These can also be set with [Video Record] > [Upload] (P. 156) and will be reflected in [Video Record Setting] here.
[Video Record Action]
Select [Record to Memory Card] to record to a memory card.
Memory Card Operations
The setting items will change depending on the memory card status (unmounted/mounted).
Important
Be sure to perform the unmount process when turning off the power to the camera or removing the memory card. Failing to unmount first
may result in management file problems or the memory card becoming inaccessible.
You can use the Camera Management Tool (P. 21) to batch mount/unmount memory cards from multiple cameras.
The following settings can be configured here.
• Video Record Setting
• Memory Card Operations
• Memory Card Information
R13
R12 M50
H652 H651
5
215
Advertisement
Table of Contents
Troubleshooting
