Canon 1064C001 Operation Manual page 233

S413 Timer service runtime error [crit]
Description
%1
Meaning
Countermeasure
S420 External IO controller has failed [crit]
Description
Meaning
Countermeasure
S430 Failure of temperature sensor [crit]
Description
Meaning
Countermeasure

Audio server error
B301 Audio device error [err]
Description
%1
%2
%3
Meaning
Countermeasure
B402 Audio server initialization failed [err]
Description
%1
Meaning
Countermeasure
232
timer working error [%1] (S413)
Error number
An error occurred while the timer
service was running.
If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
external io controller is broken.(S420)
The external IO controller has failed.
The external IO controller firmware
must be updated. If the problem
persists after updating the firmware,
the camera is faulty. Arrange for
servicing.
cannot get temperature (S430)
The temperature cannot be acquired
from the temperature sensor.
If the problem persists after rebooting,
the circuit board may have failed.
Arrange for servicing.
cannot use audio device for
%1[%2:%3] (B301)
Send/Receive type (rx | tx)
Error type (open | write | flush)
Error number
Detected an error in the audio device
If the problem persists, please arrange
for servicing.
wvaudio initialization error [%1] (B402)
Error number
The audio server could not be
initialized. The audio server stops.
If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
B403 Settings change failed [err]
Description cannot set config [%1:%2] (B403)
%1 Error notification number
%2 Error number
Meaning The settings could not be updated.
The audio server stops.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.

Video error
V300 Video input error [err]
Description video %1 warning - %2 (V300)
%1 Video number
%2 Error number
Meaning An error in the video input was
detected that may adversely affect the
operation of the camera.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
V320 Internal error in intelligent service [err]
Description cannot work intelligent [%1][%2][%3].
(V320)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in intelligent
service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
V321 Pseudo mode setting error in intelligent
service [err]
Description pseudo mode setting fail. (V321)
Meaning An error occurred in the pseudo mode
setting of intelligent service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.