Camera Control - Canon 1064C001 Operation Manual

H652 H651
[Light Source]
If you selected [Compensate for light source], select the light source.
[Fluorescent]
Select this option to capture video under fluorescent, LED, sodium or mercury lighting.
[Halogen Lamp]
Select this option to capture video under halogen or incandescent lighting.
[Infrared Light (740nm)]
Select this option to capture video under infrared (740 nm wavelength) illumination.
[Infrared Light (850nm)]
Select this option to capture video under infrared (850 nm wavelength) illumination.
[Infrared Light (940nm)]
Select this option to capture video under infrared (940 nm wavelength) illumination.

Registering a Focus Position
If you selected [Move to registered focus position] for [Day/Night Mode Focus Control], register a focus position.
In [Camera Control], select [Day Mode] for [Day/Night].
1
Use [One-shot AF] or [Adjust Focus] in [Camera Control] while viewing the video display area to adjust the camera
2
to a suitable focus position under the lighting conditions of day mode.
Click [Register] for [Day Mode Focus Position].
3
[Registered] is displayed for [Day Mode Focus Position].
4 In [Camera Control], change [Day/Night] to [Night Mode].
Repeat steps 2 and 3 to register the focus position under the Night Mode lighting conditions.
5
6 Click [Apply].
The settings are saved to the camera.
Note
• If you select an item other than [Move to registered focus position] without first clicking [Apply], the focus position returns to
[Unregistered].
• Click [Clear] to set the focus position again. The focus position setting is discarded and the setting saved in the camera is
restored.
• See the page (P. 114) for the focus ranges when using Day/Night Mode settings.

Camera Control

Set the camera focus adjustment and day/night capture mode when controlling day/night mode focus.
[One-shot AF]
Use when [Move to registered focus position] is selected in [Day/Night Mode Focus Control]. When you click [Exec], it will
focus once using autofocus and then switch to manual mode.
[Adjust Focus]
Use when [Move to registered focus position] is selected in [Day/Night Mode Focus Control]. Click [Far] and [Near] to
adjust focus.
[Day/Night]
Set a capture mode suited to the brightness of the camera installation environment.
[Auto]
The camera automatically determines ambient brightness and switches to Day Mode or Night Mode.
5
121